Tools‎ > ‎Filters‎ > ‎

IR Goggles over Glasses

Welding goggles that fit those wearing glasses appear to be available in many local hardware stores. Using the information provided by Bill Beaty's website for the proper filter combinations,

  1. Remove the filter for welding from the large face plate,
  2. Cut the filters to fit the window (use the welding filter as a template),
  3. Put the filters in place, securing with the available clips that held the welding filter.

Cost is about $10 for the larger goggles, and you use a bit more filter material, but with minimal additional cost.